Women's ION Amaze Core 4/3 Front Zip pink gradient wetsuit

Parameters

Model/product code Amaze Core 4/3 Front Zip 48233-4536

Leading colour Pink

Brand ION

Country of origin of the brand Germany

Gender Woman

Season Year-round

Sport Water sports

Usable temperature 12°C - 17°C

Foam thickness 4/3 mm

Sleeve length Long

Leg length Long

Fastening type Front-Zip

Material Nylon, Neoprene

Technologies Drain Holes, Hot Stuff 2.0, Seal Tite, Maki Tape 2.0, CordLock, Plasma Plush, Glued Blind Stitch, Replaceable Draw Cord, Silk Stuff, Seam Reinforcement

Women's ION Amaze Core 4/3 Front Zip pink gradient wetsuit 2

Sizes table

Size	32XXS	34XS	36 S	38M	40L	42XL
Chest girth (cm)	76-81	80-85	84-89	88-93	92-97	96-101
Height (cm)	157-163	160-166	163-169	166-172	169-175	172-178
Weight (kg)	41-49	46-54	51-59	56-64	61-69	66-74

Product description

Advantages

Flexibility

The neoprene material used in the production and the technologies applied make this wetsuit model very flexible. As a result, it lies well, adapting to the body and providing freedom of movement.

Chest zip

Located on the chest, the zipper is much shorter than the one on the back, so it lets less water through, and as a result, you will keep your body comfortable. This is a good choice for people who want to keep their body dry and warm.

Bonded seams

When we spend a lot of time in the water, our body is exposed to cooling due to water seeping into the wetsuit. This is also uncomfortable. This model uses taped seams to reduce water seepage as much as possible, keeping you comfortable and dry.

For waters of 12-17°

In order to choose the right wetsuit, we need to know the most common waters we will choose to use it in. This model of foam offers adequate thermal comfort in waters between 12 and 17°C.

Technologies

Drain Holes

Drainage holes appearing in clothing dedicated to watersports from O'Neill. These make it possible to drain any water entering the garment.

Hot Stuff 2.0

Thermal lining used in foams from ION. It is characterised by exceptional flexibility and provides the wearer with comfort and a feeling of warmth.

Maki Tape 2.0

Elastic neoprene tape used in ION branded wetsuits. Used in areas particularly prone to abrasion - on the seams and the inside of the cuffs.

CordLock

Innovative safety probe lock, allowing the probe to be folded and unfolded in an instant.

Plasma Plush

Plasma Plush technology consists of a special lining in the back of the garment that is extremely warm and dries quickly. The material is from the higher Select range.

Replaceable Draw Cord

Replaceable Draw Cord technology allows the cord to be easily replaced. This cord is subjected to high loads, which can lead to damage. Thanks to the new technology, the damaged element can be easily replaced.

Silk Stuff

Silk Stuff involves the use of panels of this material in key areas on the front of the garment, increasing comfort where it is needed most.

Seam Reinforcement

Seam Reinforcement involves reinforcing areas exposed to tension by securing them from the inside with Melco tape.

Glued Blind Stitch

Glued Blind Stitch technology involves gluing the seams together using a special adhesive and then stitching with a curved needle only halfway through the thickness of the neoprene for water resistance.

Seal Tite

It involves the use of a narrow rubber strip on the cuffs of the leg and arm ends and on the collar. This provides a better seal and prevents the material from leaking.