HEAD ski helmet Rachel Pro grey/red yellow (323274)

Fidlock fastener

The chin strap uses a Fidlock type fastener. This is a simple fastener that operates using magnets. Its operation is quick and easy, even with thick ski gloves. It is both strong and durable.

Active ventilation

The active ventilation system allows the airflow to be individually controlled to suit current needs. Thanks to this solution, excess warm air and moisture will be vented to the outside, without being exposed to excessive cooling.

EN 1077 certification

This is a European safety certificate which certifies that the helmet has passed crash and point tests. The first part of the test determines the maximum force that can act on the helmet during a collision, checking absorption through deformation, while the second tests the strength of the shell during point impacts, such as with a ski pole.

Size adjustment using the BOA® system

This is an advanced helmet adjustment system using thin steel cables that allow the helmet to be adjusted even more precisely to the head. This system provides a quick vertical adjustment, even with one hand. It also prevents the material from rolling off during adjustment.

Soft ear muffs

Soft ear muffs are a different helmet design with ear muffs that are not overlapped by the helmet shell. They are extremely soft and protect the ears from the cold without interfering with sound reception. They do not, however, provide protection against injuries that may occur in the event of an accident.

EPS inner shell

Under the outer, impact-resistant shell, there is an inner layer made of polystyrene. It has a varying density and its main function is to absorb the force of impact during an accident. It provides a good level of safety.

Integrated viewfinder

The construction with an integrated visor guarantees a well-fitting visor to the shape of the helmet. In addition, the lens has a much larger surface area than that used in goggles, which increases the field of vision and, thanks to the large space between the visor and the face, corrective goggles can be worn without difficulty.

In-mould construction

This construction mainly combines different types of in mould foam of different hardnesses. These layers are closely linked to the outer layer of material, which is much harder. This construction makes the helmet extremely lightweight.