Men's ION Seek Core 2/2 Shorty Back Zip dark collage swimming wetsuit

Parameters

Model/product code Seek Core 2/2 Shorty Back Zip 48232-4431

Leading colour Grey

Brand ION

Country of origin of the brand Germany

Gender Male

Season Spring/Summer

Sport Water sports

Usable temperature 21°C - 26°C

Foam thickness 2/2 mm

Sleeve length Short

Leg length Short

Fastening type Back-Zip

Material Nylon, Neoprene

Technologies Hot Stuff 2.0, Water Gate, Maki Tape 2.0, SWEEP_CUT, Glued Blind Stitch, Plasma Plush, Drain Holes, Silk Stuff, Seam Reinforcement

Men's ION Seek Core 2/2 Shorty Back Zip dark collage swimming wetsuit 2

Sizes table

Size	48S	94 STall	25MSall	50M	98MTall	26LSmall	52L	102LTall	27XLSmall	54 XL	106XLTall
Chest girth (cm)	93-98	92-98	98-104	98-103	97-103	103-109	103-109	102-108	108-114	108-113	107-113
Height (cm)	172-178	179-184	167-174	175-181	182-189	170-177	178-184	185-192	173-180	181-187	188-195
Weight (kg)	62-70	65-74	66-75	70-78	73-82	74-83	78-86	81-90	82-91	86-94	89-98

Product description

Advantages

2 mm thick wetsuit

You need to make your choice of wetsuit depending on what time of year you are swimming and what the water temperature is at the time. This model uses 2 mm thick neoprene, which means it will provide comfort in warm waters.

Flexibility

The neoprene material used in the production and the technologies applied make this wetsuit model very flexible. As a result, it lies well, adapting to the body and providing freedom of movement.

Zipper on the back

If you want to get your wetsuit on easily and quickly, this is the right model for you. The placement of the long zip on the back makes it much easier to get into the wetsuit and to take it off when you get out of the water.

Bonded seams

When we spend a lot of time in the water, our body is exposed to cooling due to water seeping into the wetsuit. This is also uncomfortable. This model uses taped seams to reduce water seepage as much as possible, keeping you comfortable and dry.

Technologies

Drain Holes

Drainage holes appearing in clothing dedicated to watersports from O'Neill. These make it possible to drain any water entering the garment.

Hot Stuff 2.0

Thermal lining used in foams from ION. It is characterised by exceptional flexibility and provides the wearer with comfort and a feeling of warmth.

Maki Tape 2.0

Elastic neoprene tape used in ION branded wetsuits. Used in areas particularly prone to abrasion - on the seams and the inside of the cuffs.

SWEEP_CUT

A special foam construction that does not use seams in the shoulder area. This design provides greater comfort and flexibility, without restricting movement during activity.

Plasma Plush

Plasma Plush technology consists of a special lining in the back of the garment that is extremely warm and dries quickly. The material is from the higher Select range.

Silk Stuff

Silk Stuff involves the use of panels of this material in key areas on the front of the garment, increasing comfort where it is needed most.

Seam Reinforcement

Seam Reinforcement involves reinforcing areas exposed to tension by securing them from the inside with Melco tape.

Glued Blind Stitch

Glued Blind Stitch technology involves gluing the seams together using a special adhesive and then stitching with a curved needle only halfway through the thickness of the neoprene for water resistance.

Water Gate

The Water Gate is an additional panel placed inside the suit that seals the zip on the back and creates a barrier to prevent water from entering the suit.