The 5-person AQUASTIC DS Hybrid pontoon is equipped with a rigid, high-pressure floor made using modern drop stitch technology. The complete set with aluminium paddles and a transport bag weighs exactly 39.0 kg.
Basic data
Product details
Warnings and producer's data
Dinghy 5-osobowy AQUASTIC DS Hybrid grey (AQS-B6I014-GY)
The 5-person AQUASTIC DS Hybrid pontoon is an advanced watercraft designed for recreational use on lakes and rivers. Its spacious hull, measuring 350 cm in length and 160 cm in width, offers excellent nautical properties and optimal lateral stability. Durable sides made of a three-layer, laminated PVC fabric with a thickness of 1 mm ensure long-lasting use and complete reliability.
Innovative high-pressure floor technology
The pneumatic floor, which is 8 cm thick, is produced using drop stitch technology with a fabric density of 2400 g/m2. This solution gives the floor exceptional stiffness, allowing five passengers to stand and move freely. The maximum recommended pressure in the floor chamber is 1.03 BAR, improving hydrodynamic properties while swimming.
Reliable air chamber system
The boat's design includes three low-pressure side chambers and one independent chamber located directly in the floor. Each section is equipped with a professional Halkey Roberts valve, facilitating efficient inflation and deflation of air. Safety is enhanced by double safety lines and an external rubber bump strip, which absorbs impacts against hard docks.
Integrated transom for engine installation
The pontoon is equipped with a reinforced transom suitable for the installation of an outboard engine with a maximum power of 11 kW. This value corresponds to 15 HP, allowing for rapid acceleration on open water bodies. A metal D-ring is mounted at the front of the hull for safe towing or mooring of the boat.
Compliance with European safety standards
The pontoon meets the stringent requirements of the European Parliament and Council Directive 2013/53/EU concerning recreational craft. The construction has been officially tested and demonstrates full compliance with the international technical standard ISO 6185-2. Official certificates confirm the highest standard of workmanship and complete safety for passengers during voyages.
5-person AQUASTIC DS Hybrid pontoon - features:
• Pneumatic watercraft with a maximum permissible load of exactly 480 kilograms;
• Optimal hull dimensions, when inflated, measure exactly 350 cm in total length;
• Three low-pressure side chambers operating under a recommended working pressure of 0.25 BAR;
• High-pressure floor using drop stitch technology with a thickness of eight centimetres, ensuring stiffness;
• Sides made of durable, three-layer laminated PVC fabric with a thickness of one millimetre;
• Integrated transom suitable for mounting a 15 HP external outboard engine;
• Independent Halkey Roberts valves ensuring airtightness and efficient inflation;
• Product fully compliant with EU Directive 2013/53/EU and standard ISO 6185-2.
Product Details
Transport handles
There are 8 ergonomic side handles placed around the hull that facilitate the comfortable carrying of the inflated boat to the shore. An additional safety rope mounted along the sides provides a secure support point for people in the water.
Drop stitch technology
The high-pressure bottom with a thickness of 8 cm was produced using modern technology with a fabric density of 2400 g/m2. This construction achieves exceptional rigidity when inflated to 1.03 BAR, allowing for stable standing.
Complete accessories
The package contains a sliding bench, two aluminium oars mounted on the clips, and an efficient hand pump. The rich equipment allows for an immediate start to the water adventure right after unpacking the shipment.
Double-sided safety rope
A strong safety line has been installed along the outer sides, which increases passenger safety in deep water. It provides a secure point of support and facilitates reboarding directly from the water.
Front d-ring hook
In the bow section, a sturdy metal d-ring has been installed for safely towing the unit on water. It also serves as the main attachment point for the mooring line while at rest on the shore.
Sliding cockpit bench
The bench included in the set has a smooth adjustment system for positioning along the internal profile of the sides. This allows for free adjustment of the seating space and optimal distribution of the entire load.
There are no reviews yet, be the first!
Review this product
Dinghy 5-osobowy AQUASTIC DS Hybrid grey
Dinghy 5-osobowy AQUASTIC DS Hybrid grey
- We are calculating the delivery time for you More
- Delivery from 3,99 € More
- 30 days to return More
- Original products Check it out
